8
1.3 IMPORTANT SAFETY INSTRUCTIONS
The units are CE or UL approved, but whenever using this equipment basic safety precautions should always
be followed, including the following:
1.
Read all instructions.
2.
Do not operate equipment with a damaged power cord or if the equipment has been damaged until it
has been examined by a qualifi ed authorized service technician.
3.
If an extension cord is used, a cord with a current rating equal to or more than that of the machine
should be used. Cords rated for less current than the equipment may overheat. Care should be taken
to arrange the cord so that it will not be tripped over or pulled.
4.
Always unplug equipment from electrical outlet when not in use. Never use the cord to pull the plug
from the outlet. Grasp plug and pull to disconnect.
5.
To reduce the risk of fi re, do not operate equipment in the vicinity of open containers of fl ammable
liquids (gasoline).
6.
Keep hair, loose fi tting clothing, fi ngers and all parts of the body away from moving parts.
7.
To reduce the risk of electric shock, do not use on wet surfaces or expose to rain.
8.
Do not hammer on or hit any part of the control panel with weight pliers.
9.
Do not allow unauthorized personnel to operate the equipment.
10.
Use only as described in this manual. Use only manufacturer’s recommended attachments.
11.
Always securely tighten the wing nut before spinning the shaft.
12.
ALWAYS WEAR SAFETY GLASSES. Everyday eyeglasses only have impact resistant lenses, they are
NOT safety glasses.
13.
Balancer is for indoor use only.
1.4 ELECTRICAL SAFETY PRECAUTIONS
Make sure the balancer is unplugged before disconnecting any wires in preparation for replacing any boards, cables
or other items within the unit.
SM HOF GEODYNA 7600 Rel.D
Summary of Contents for geodyna 7600
Page 1: ...geodyna 7600 Service Manual ...
Page 118: ...118 SM HOF GEODYNA 7600 Rel D ...
