70
0X001061
CAL WEIGHT NOT AT 12 O’CLOCK IN STEP 2 OF C115
Perform the calibration C115 with weight in the correct side.
If the problem still persists:
Call Snap On
C Codes
C115, C84, C88, C90
0X001080
SPINUP TIMEOUT
Check the belt adjustment.
If the problem still persists:
Check the belt.
If the problem still persists:
Check the brake adjustment.
If the problem still persists:
Check the motor connector and cable
If the problem still persists:
Check the motor pulley.
If the problem still persists:
Check the main shaft Optoencoder fl at cable
If the problem still persists:
Check the motor.
If the problem still persists:
Check the main shaft Optoencoder.
If the problem still persists:
Check the IBP box
If the problem still persists:
Call Snap On
C Codes
C60, C74, C54, C115, C84, C88, C90
0X001081
NO ACCELERATION
Check wing nut
If the problem still persists:
Check the shaft.
If the problem still persists:
Check the wheel clamping.
If the problem still persists:
Check the belt adjustment.
If the problem still persists:
Check the belt.
If the problem still persists:
Check the brake adjustment.
If the problem still persists:
Check the motor connector and cable
If the problem still persists:
Check the motor pulley.
If the problem still persists:
Check the main shaft Optoencoder fl at cable
If the problem still persists:
Check the motor.
If the problem still persists:
Check the main shaft Optoencoder.
If the problem still persists:
Check the IBP box
If the problem still persists:
Call Snap On
C Codes
C74, C54, C115, C84, C88, C90
SM HOF GEODYNA 7600 Rel.D
Summary of Contents for geodyna 7600
Page 1: ...geodyna 7600 Service Manual ...
Page 118: ...118 SM HOF GEODYNA 7600 Rel D ...