Hitachi HF-W100E, Instruction Manual

Page: 210 / 220

9. TROUBLESHOOTING
9-16
Table 9-2 lists event log entries unique to the equipment. No.1 through 6 are collected in the
system log, and Nos.7 and 8 are collected in the application log.
Table 9-2 Event Log Entries Unique to the Equipment (1/1)
No.
Event
ID
Source Type Description Action
1 259 HFWRAS_S
YS
Warning The temperature
exceeded prescribed
value. Read the description of abnormal
temperature in “9.2.2 Problems that
occur after the OS startup (1) The
alarm lamp is lit” and take action
accordingly.
2 263 HFWRAS_S
YS
Information Temperature returned to
prescribed value.
No handling
3 265 HFWRAS_S
YS
Warning A failure may be
imminent on the drive
of the mSATA SSD%1
(%2). We recommend you back up the data
and replace the drive.
4 268 HFWRAS_S
YS
Error The computer was shut
down because
temperature became
dangerous. Read the description of abnormal
temperature in “9.2.2 Problems that
occur after the OS startup (1) The
alarm lamp is lit” and take action
accordingly.
5 525 HFWRAS_S
YS
Information In the DIMM %1, error
correcting have
occurred with high
frequency.
The DIMM may be out of order.
Contact your system administrator or
maintenance personnel.
6 539 HFWRAS_S
YS
Error The "%1" was finished. Hardware monitoring of the RAS
software has been terminated. If
restarting the equipment does not
resolve the error, contact the system
administrator or maintenance
personnel.
7 769 HFWRAS_A
PP
Error An error occurred
in %1. errorcode = %2. An error was generated by the RAS
software while the software was
running. If restarting the equipment
does not resolve the error, contact the
system administrator or maintenance
personnel.
8 771 HFWRAS_A
PP
Error Because a wrong value
is set up in registry
value "%1", default
value %2 is set up. If restarting the equipment does not
resolve the error, contact the system
administrator or maintenance
personnel.
No.3 : %1 denotes the drive bay number. %2 denotes the manufacturer and the model name of
the drive.
No.5 : %1 denotes the slot number of the DIMM.
No.6 : %1 records one of the following :
TEMP, MEM, CPU, TEMPLOG, WDT, SMART, RASLOG, INTERNAL
–
LOGD
No.7 : %1 denotes the function terminated with an error. %2 denotes the error code.
No.8 : %1 denotes the registry key that has an illegal value. %2 denotes the default value of the
registry key.