Hitachi HF-W100E Instruction Manual Download Page 88

Page: 88 / 220

3. SETUP

3-8

3.2.1.2 Setting up Auto-update

Windows® 7 has an automatic updating function for bug fixes. This function automatically

downloads and installs bug fix updates released on the Microsoft Web site.

It should be noted that currently running programs can be affected when this function is

executed. The modules updated by this function can also affect currently running programs.

Because of all this, this function must be turned “off”.

The following procedure shows how to turn off automatic updating.

1. If you are not logged on to the computer as an administrator account, log on to the

computer as an administrator account.

2. Click

Start

and click

Control Panel

3. Since the

Control Panel

is displayed, and click

System and Security

4. Click

Turn automatic updating on or off

under

Windows Update

Summary of Contents for HF-W100E





























































































































































































































Search results

Summary of Contents for HF-W100E

Reviews:

Related manuals for HF-W100E

Brands by name

Popular brands

Hitachi HF-W100E, Instruction Manual

Search results

Summary of Contents for HF-W100E

Reviews:

Related manuals for HF-W100E

Brands by name

Popular brands