Hitachi HF-W100E, Instruction Manual

Page: 134 / 220

5. SPECIFICATION
5-2
(*1) The “xx” denotes the OS type. For details about OS types, see “ (2) Pre-installed OS model
specifications”. If “xx” is “NO”, an OS is not installed.
Depending on the language of the OS, MUI (Multilingual User Interface). A language
supporting in MUI is English, Korean, Portuguese, Thai, Chinese (China).
(*2) For information about the precautions for mSATA SSD, see “PRECAUTIONS 4. MINI
SERIAL ATA SOLID STATE DRIVES (mSATA SSDs)”.
For details of partition configuration, see "5.1 Equipment Specification (3) Partition
configuration”.
(*3) By using a conversion connector or DVI-A cable, you can output an analog VGA signal. The
conversion connector or DVI-A cable must be provided by the users.
(*4) At the LAN port, only two ports may be set to EtherCAT by default. See “1.4 Name and
Function of Each Part (1) Front view”)
(*5) It is the specification of the AC adapter.
(2) Pre-installed OS model
OS type Pre-installed OS + Software
PA Microsoft® Windows® 10 IoT Enterprise
2016 LTSB
(64bit) (Embedded) + Softmotion
PB Microsoft® Windows® 10 IoT Enterprise
2016 LTSB
(64bit) (Embedded) + Soft CNC
PF Microsoft® Windows® 10 IoT Enterprise
2016 LTSB
(64bit) (Embedded)
PG Microsoft® Windows® Embedded Standard 7 SP1 (64bit) + Softmotion
PH Microsoft® Windows® Embedded Standard 7 SP1 (64bit)+ Soft CNC
PL Microsoft® Windows® Embedded Standard 7 SP1 (64bit)
(3) Partition configuration
The partition configuration in the OS preinstalled model of this equipment is as follows.
In addition to the boot partition (C :) where Windows® is installed, two partitions are
arranged.
Drive Use Capacity
C: Boot partition
Windows® Embedded Standard 7
28GB
Windows® 10
27.5GB
G: Application data storage partition 1GB
H: Fault analysis information partition About 700MB
・
Application data storage partition
Please use as a storage area of the application data (logs etc.). In particular, you can use it
as a writing area when using the filter feature of Embedded Enabling Features(EEF). For
details on the Embedded Enabling Features, see "4.1 Embedded Enabling Features of
Windows® Embedded Standard 7".
・
Fault analysis information partition
It is arranged as an area for storing information necessary for failure analysis such as
Windows® event logs and minimum memory dump file, and it is set mount settings.
Therefore, do not change the drive letter or write to this area. For the mount setting, see
"9.6 Failure Analysis Information Partition Mount Setting".