Hitachi HF-W100E, Instruction Manual

Page: 49 / 220

1. GETTING STARTED
1-9
1.5.2 Installation
WARNING

It may cause electric shock or equipment failure. When using this equipment
without optional AC adapter and attached power cable, prepare the AC adapter
and power cable which fit input voltage and inspect the safeness of this
equipment enough.

It may cause electric shock or equipment failure. The power cable attached to
AC adapter is rated at the input voltage of 125VAC. When using this optional
AC adapter at over 125 VAC, prepare the power cable which fit input voltage
and inspect the safeness of this equipment enough.

It may result in a fire or electric shock. When you connect the plug of the power
cable to an outlet, make sure you use an outlet with a ground terminal (ground
pole) that is properly grounded. In addition, you must install and use an earth
leakage circuit breaker..

It may cause electric shock or equipment failure. Do not use a two-prong plug
without a ground pole.

It may cause electric shock or equipment failure. Make sure to connect the
ground wire to the ground terminal of the equipment when the user
independently prepares a DC power supply unit and a DC power cable.
NOTICE

When you transport or carry the equipment, pack it in the dedicated container
(the container and packing materials used when the equipment was delivered).
If you use other container or packing materials, that may damage the
equipment.

Do not use damaged or broken dedicated container when you transport or
carry the equipment. If you do, that may damage the equipment.
< NOTE >
・
For information about the precautions for concerning installation requirements,
see “ PRECAUTIONS 1. PRECAUTIONS ABOUT THE EQUIPMENT (5)
INSTALLATION ENVIRONMENT ” .