Hitachi HF-W100E, Instruction Manual

Page: 41 / 220

1. GETTING STARTED
1-1
CHAPTER 1 GETTING STARTED
1.1 Scope
This manual is intended for operators of the HITACHI INDUSTRIAL COMPUTER HF-
W100E and contains information about the operation and maintenance of various devices
necessary for their routine use.
After you unpack, go through the “delivered items list” to confirm all the items have been
delivered and no items are missing or damaged. If there are missing or damaged items,
contact our sales representative.
For information about RAS features, refer to the following manuals.
・
HITACHI INDUSTRIAL COMPUTER HF-W100E RAS FEATURES MANUAL
(manual number WIN-63-0095)
1.2 Role of an Operator
In order to use this equipment in good working order for a long period of time, an operator
must take care of the following items.
(1) Consideration for the characteristics of the equipment
(a) See “PRECAUTIONS 1. PRECAUTIONS ABOUT THE EQUIPMENT” and take
necessary actions considering the characteristics of the equipment.
(b) The instructions described in this manual are the basics of the procedures you need to
follow when you use the equipment. Make sure you follow these instructions.
(c) For information about how to use the equipment, how to clean the equipment, and so on,
see the respective chapters.
(2) Keep this equipment in good condition
When you use this equipment, an operator must take care of the following items.
(a) Backing up files
See “PRECAUTIONS 4. MINI SERIAL ATA SOLID STATE DRIVES (mSATA SSDs)
(2) Backing Up Files”.
(b) Power cable and shutting down the power
See “PRECAUTIONS 1. PRECAUTIONS ABOUT THE EQUIPMENT
(4) POWER SUPPLY”.
(3) Maintenance of this equipment
(a) For information about maintenance, see “6.1 Periodic Checkup”.