OPERATOR’S STATION
1-11
TACHOMETER
Tachometer indicates engine speed in min
-1
(R.P.M).
COOLANT TEMPERATURE GAUGE
•
White zone (A) : Low temperature. Warming up op-
eration is required.
•
Blue zone (B) : Normal operating temperature.
•
Red zone (C) : High temperature. Coolant is over-
heating.
If needle enters the red zone (C), reduce load immediately
and run the engine at high idle or auto idle until needle re-
turns to the blue zone (B). Stop the engine after cooling
down and check radiator for restriction and clean fins or
check the coolant leakage. If the problem continues, con-
tact your authorized dealer.
IMPORTANT: Prevent possible engine damage.
Do not stop the engine when needle en-
ters red zone, as temperature will rise
further. Instead, reduce load and run the
engine at high idle or auto idle.
HYDRAULIC OIL TEMPERATURE GAUGE
•
White zone (A) : Low temperature. Warming up op-
eration is required.
•
Blue zone (B) : Normal operating temperature.
•
Red zone (C) : High temperature. Hydraulic oil is
overheating.
If needle enters the red zone (C), reduce load immediately
and run the engine at high idle or auto idle to cool down
until needle returns to the blue zone (B). . Stop the engine
after cooling down and check oil cooler for restriction and
clean fins or check the hydraulic oil leakage. If the problem
continues, contact your authorized dealer.
FUEL GAUGE
As fuel level goes down, blue lights of fuel level indicator
(A) will go OFF. When the fuel remains come to approxi-
mately 755 liters (200 US gal), fuel level warning indicator
(B) will become amber. When the fuel is full, full indicator
(C) will light.
M18M-01-011
M18M-01-012
M18M-01-013
M18M-01-014
A
C
B
A
C
B
B
A
C
Summary of Contents for EX 3600-6
