![Hitachi EX 3600-6 Operator'S Manual Download Page 16](http://html.mh-extra.com/html/hitachi/ex-3600-6/ex-3600-6_operators-manual_141602016.webp)
SAFETY
S-7
OPERATE ONLY FROM OPERATOR’S SEAT
•
Inappropriate engine starting procedures may cause the
machine to runaway, possibly resulting in serious injury
or death.
•
Start the engine only from the operator’s seat.
•
NEVER start the engine while standing on the track or
on ground.
•
Do not start engine by shorting across starter termi-
nals.
•
Before starting the engine, confirm that all control lev-
ers are in neutral.
012-E01B-0444
SA-444
JUMP STARTING
•
Battery gas can explode, resulting in serious injury.
•
If the engine must be jump started, be sure to follow
the instructions shown in the “OPERATING THE EN-
GINE” chapter.
•
The operator must be in the operator’s seat so that
the machine will be under control when the engine
starts. Jump starting is a two-person operation.
•
Never use a frozen battery.
•
Failure to follow correct jump starting procedures
could result in a battery explosion or a runaway ma-
chine.
S013-E01A-0032
SA-032
KEEP RIDERS OFF MACHINE
•
Riders on machine are subject to injury such as being
struck by foreign objects and being thrown off the ma-
chine.
•
Only allow the operator on the machine. Keep riders
off.
•
Riders also obstruct the operator’s view, resulting in
the machine being operated in an unsafe manner.
014-E01B-0379
SA-379
Summary of Contents for EX 3600-6
