SAFETY
S-16
OBJECT HANDLING
•
If a lifted load should fall, any person nearby may be
struck by the falling load or may be crushed underneath
it, resulting in serious injury or death.
•
When using the machine for craning operations, be
sure to comply with all local regulations.
•
Do not use damaged chains or frayed cables, sables,
slings, or ropes.
•
Before craning, position the upperstructure with the
travel motors at the rear.
•
Move the load slowly and carefully. Never move it
suddenly.
•
Keep all persons will away from the load.
•
Never move a load over a person’s head.
•
Do not allow anyone to approach the load until it is
safely and securely situated on supporting blocks or
on the ground.
•
Never attach a sling or chain to the bucket teeth. They
may come off, causing the load to fall.
030-E01A-0014
SA-014
PROTECT AGAINST FLYING DEBRIS
•
If flying debris hit eyes or any other part of the body, se-
rious injury may result.
•
Guard against injury from flying pieces of metal or de-
bris; wear goggles or safety glasses.
•
Keep bystanders away from the working area before
striking any object.
031-E01A-0432
SA-432
Summary of Contents for EX 3600-6
