![Hitachi EX 3600-6 Operator'S Manual Download Page 293](http://html.mh-extra.com/html/hitachi/ex-3600-6/ex-3600-6_operators-manual_141602293.webp)
TROUBLESHOOTING
11-6
ELECTRICAL SYSTEM
Problem Cause
Solution
Nothing Works
Battery
Recharge or replace.
Nothing Works
(Except clock)
Battery relay
Replace relay.
Batteries Undercharged
Loose or corroded connections
Clean and tighten or replace batteries.
Alternator belt loose
Tighten or install new belt.
Alternator not charging
See your authorized dealer.
Fuse Replace
fuse.
Key switch failure
Replace key switch.
Starting Motor Will Not Turn
Battery undercharged or dead
Recharge or replace battery.
Battery cables making poor
connections
Clean connections.
High current fuse
Replace high current fuse.
Key switch
See your authorized dealer.
Start relay
See your authorized dealer.
Starter solenoid
See your authorized dealer.
Starter
Repair or replace start motor.
Starter pinion jammed in flywheel
gear
Repair or replace starter.
Major engine failure
See your authorized dealer.
Starter Solenoid Chatters
Poor connections at batteries or
starter
Clean connections.
Low battery charge
Recharge or replace batteries.
Starter solenoid “hold-in” windings
open
See your authorized dealer.
Starter Motor Turns but Will
Not Crank Engine
Starter pinion gear not engaging
flywheel ring gear
See your authorized dealer.
Pinion shift mechanism jammed or
malfunctioning
See your authorized dealer.
Pinion gear teeth broken
See your authorized dealer.
Flywheel gear teeth broken
See your authorized dealer.
Engine Cranks Slowly
Battery cables damaged or broken
internally
Inspect and replace cables.
Battery or starter cable
connections loose or corroded
Clean and tighten connections.
Summary of Contents for EX 3600-6
