manualshive.com logo in svg

Hitachi EX 3600-6, Operator'S Manual

Share
Download
Hitachi EX 3600-6 Operator'S Manual Download Page 130

OPERATING THE MACHINE 

5-11 

PRECAUTIONS FOR OPERATIONS

 

  WARNING: Investigate the work site before start-

ing operations. 

• 

Be sure to install an overhead cab guard when 
operating in a work site which has a possibility 
of falling objects. 

• 

If operation on soft ground is required, suffi-
ciently reinforce the ground beforehand. 

 

• 

Be sure to wear close fitting clothing and safety 
equipment appropriate for the job, such as a hard hat, 
etc. when operating the machine. 

• 

Clear all persons and obstacles from area of operation 
and machine movement.   
Always beware of the surroundings while operating. 
When working in a small area surrounded by obsta-
cles, take care not to hit the upperstructure against 
obstacles. 

• 

When loading onto trucks, bring the bucket over the 
truck beds from the rear side. Take care not to swing 
the bucket over the cab or over any person. 

 

 NOTE:  The standard specification machine is equipped 

with the head guard integrated cab. 

 

 

M117-05-006 

 

Summary of Contents for EX 3600-6



















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands