77
Maint
enance
En
g
lish
Water supply inlet
Clean the water supply inlet if water supply is not smooth.
Close the tap, and disconnect the water supply hose.
Close
Union nut
Water supply inlet filter
Water supply inlet filter
z
To prevent water from spilling, perform the following.
Close the tap, and press
to turn on the power.
Press
to select the [TUB CLEAN] program.
Press
to start.
Run the operation for about 10 seconds, press
, and
then press
to turn off the power.
Loosen the union nut and remove it.
Remove any debris from the water supply inlet’s filter using
a toothbrush or similar tool.
z
Remove the water supply inlet’s filter using pliers before cleaning it.
z
After removing the water supply inlet’s filter and cleaning it, be sure
to reattach it. Failure to do so may result in damage to the water
valve.
Reconnect the water supply hose properly.
(Installation Instructions)
z
Failure to do so will result in water leakage.
Summary of Contents for BD-W3500
Page 198: ...198 ýĔüúęâ ...