Hitachi BD-W3500, Operating Instructions Manual, Page: 58 / 200

58
Using the DELAY START Function
How to change the delay time
„
The delay time indicates the time at which the operation will finish.
For example, if you want the operation to finish three hours later, set the delay time to 3 hours.
„
The setting changes with each press of the button.
Operation finishes 3 hours later
3 to 12 hours later For [WASH] operations
5 to 12 hours later For [WASH DRY] operations
Initial settings
N
o
t s
e
t
12
H
R
L
A
T
E
R
11
H
R
L
A
T
E
R
6 H
R
L
A
T
E
R
5 H
R
L
A
T
E
R
4 H
R
L
A
T
E
R
3 H
R
L
A
T
E
R
WASH WASH-DRY
„
The [BLANKET] and [DELICATE] wash programs and the [DRY] and [CLEAN] operations cannot
be delayed.
After setting the delay
z
To check the delay time: Press button. (The delay time appears while the button is pressed.)
z
To cancel the delay: Press to turn off the power.
z
To change the delay time: Press to turn off the power, and start over.
z
To add laundry: Add the laundry without turning the power off.
z
The time at which the operation finishes may vary depending on the volume and type of laundry,
amount of water, water and air temperature, and drainage conditions.
z
Do not wash laundry with items that are likely to bleed color using delayed operations.
z
If the power plug is disconnected or a power outage occurs, the delay will be canceled.
z
To reduce wrinkles, hang laundry as soon as possible after the operation finishes.
z
The [PAUSE] button will be disabled until the DELAY START operation starts.
z
Remove the laundry as soon as possible after the operation finishes.
Leaving the laundry inside after the operation finishes can result in odors.
We recommend using the Soft Guard function for delayed [WASH DRY] operations.
(P. 69)
z
Do not add too much laundry after setting the delay time.
Doing so may reduce washing results and result in uneven drying.
z
Even if you set a delay, the operation for large wash loads may start immediately after you press the [START]
button due to the longer operation time required for large loads.