89
T
rouble
shooting
Symptom
Possible cause
Solution
Oper
ations
Socks and
handkerchiefs get
caught between
the inside of the
door and the door
bellows during
operations.
Is the wash load large?
When washing larger loads, separate socks,
handkerchiefs, and smaller items into a
commercially available mesh laundry bag.
Place smaller items into the back of the drum first,
and then load the remaining laundry.
Use the optional washing cap.
(P. 98)
Drops of water
form on the inside
and bottom of
the door and the
door bellows after
operations.
z
These drops of water are due to the splashing
that occurs during the wash and spin
operations.
If this is a concern, wipe the water with a dry cloth.
Laundry sticks
to the walls of
the drum after
operations.
Did you wash a lot of items made of cotton?
z
Although Tangle-Free Finish is performed at
the end of the [FUZZY] program’s spin cycle,
cotton items may not untangle sufficiently.
Use the [SOFT] program.
If the Tangle-Free Finish function is disabled,
enable it.
(P. 69)
Are you running [WASH DRY] for small loads of
laundry?
z
The drying operation operates while the
laundry is stuck to the drum.
Increase the number of laundry items.
Did you disable the Tangle-Free Finish function?
For details on the Tangle-Free Finish setting, see
(P. 69)
.
z
Does the laundry stick regardless of the
above?
We recommend using a fabric softener.
The power turns
off when spin
operations are
paused.
Was Tangle-Free Finish in progress?
This is not a malfunction.
When you pause during a Tangle-Free Finish
operation, the power turns off to end the
operation.
Water is consumed
during drying
operations.
Are you running the [STATIC DRY] or [SILENT]
program?
This is not a malfunction.
Is the Water-Cooling Mode set?
This is not a malfunction.
For details on the air / water cooling
dehumidification modes, see
(P. 70)
.
z
Depending on the operating environment and
pipe conditions, some water may be consumed.
This is not a malfunction.
O
p
e
ra
tio
n t
im
e
s
Operation times
are long.
Did the laundry gravitate to one side during the
spin operation?
z
If so, the operation time will be longer, as
an operation to correct this is automatically
added.
Load laundry into the drum carefully to avoid
concentration on one side.
(P. 19, 20)
Did you add additional laundry during a wash
operation?
z
If you add laundry while an operation is in
progress, the increase to the original detected
weight may increase the operation time.
This is not a malfunction.
z
The actual operation time may differ from
the original remaining time indication, as it
changes depending on the type and size of
the laundry items and the temperature of the
air and water.
This is not a malfunction.
En
g
lish
Summary of Contents for BD-W3500
Page 198: ...198 ýĔüúęâ ...
