74
Maintenance
(continued)
Dry filter (continued)
Return the dry filter to its original state, and
reinsert it securely.
If filter B detaches during cleaning
Filter B
Shaft
z
If filter B detaches, align filter B with the shafts on the
main body of the dry filter, and push it in vertically.
z
Reinsert the dry filter securely.
If it is not securely inserted, steam may leak out of the area surrounding the filter during drying operations,
resulting in louder operation noise.
z
If you continue operations while [DRY FILTER] and “C06” are displayed, longer drying times and poor drying may result.
(P. 80)
z
When cleaning the dry filter with water, wash it gently with your hands. Do not use detergent or bleach.
z
If [DRY FILTER] and “C06” still appear when you turn on the power after reinserting the dry filter, pressing the
[START] button will turn them off.
z
These indications also appear after every 25 times the [WASH DRY] and [DRY] operations are used. (They will
appear even if lint buildup is low.)
Note
z
The dry filter is a consumable part. If the filter mesh breaks, contact your dealer for a replacement.
(P. 98)
Dry filter port
Clean the dry filter port when the [DRY FILTER] indicator does not turn off or when “C06” appears.
Lint may be present at the rear of the dry filter port. In such cases, use the supplied suction nozzle to clean the port.
Press
to turn on the power.
Suction
nozzle
Hold the
button for at least 3 seconds.
z
After “---” appears in the remaining time indicator, the machine will
automatically turn off.
Remove the dry filter when the display disappears.
Dry filter port
Attach the suction nozzle to the suction point of the vacuum
cleaner, and clean the rear of the dry filter port.
z
Remove the lint from the top and bottom of the rear area.
z
If the suction nozzle does not fit (i.e., is too small) the suction point of your vacuum cleaner, perform one of the
following depending on your vacuum cleaner.
Hitachi model: Attach the attachment (vacuum cleaner accessory) to the vacuum cleaner.
Non-Hitachi model: Attach the suction nozzle to the vacuum cleaner and attach tape to the base of the
nozzle.
z
Clean the dry filter while it is dry.
Picking up lint that is moist may result in malfunction of the vacuum cleaner.
z
Do not insert your hands or fingers in to the dry filter port.
Doing so may result in injuries, as the port is narrow.
Summary of Contents for BD-W3500
Page 198: ...198 ýĔüúęâ ...
