5
F
e
at
ure
s
/
P
re
p
a
ration
En
g
lish
Reasons for abnormal drainage
z
Is the drain hose elevated more than 10 cm
above the ground?
z
Is the drain hose firmly attached to the drain
outlet?
(Installation Instructions)
The drain hose must not be elevated more than
10 cm when going over a threshold, for example,
and its total length must be 2 m or less.
10 cm or less
2 m or less
Reasons for stops and abnormal sounds
and vibration during the spin cycle
z
Is the machine installation level?
z
Is the air bubble in the spirit level inside the
circle?
(Installation Instructions)
Ú
View the spirit level
from directly above.
Circle
Air
bubble
Reasons for water leakage
z
Are you using Hitachi’s new one-touch joint
(supplied) for the connection to the tap?
(P. 6)
z
Is the connection to the tap loose?
z
Is the union nut firmly connected to the
machine?
(Installation Instructions)
Preparation
If you have any problems with the installation, contact your dealer or the service technician that
performed installation.
Checking the installation
If problems occur during use,
see
(P. 79 to 96)
.
Summary of Contents for BD-W3500
Page 198: ...198 ýĔüúęâ ...