92
Symptom
Possible cause
Solution
Rema
ining
time
indicat
or
The remaining time
indicator blinks
and does not
decrease during
drying operations.
z
Operations may extend 1 to 2 hours after the
“10 minutes remaining” indicator appears.
This occurs automatically when the machine
detects that the laundry is not sufficiently dry.
This is not a malfunction.
The remaining
time indicator
blinks after spin
operations.
Is the Tangle-Free Finish function set?
z
This indicator display occurs during the
untangle process after spin operations.
The power turns off automatically when you press
the [PAUSE] button, allowing you to remove the
laundry.
For details on the Tangle-Free Finish setting, see
(P. 69)
.
Are you running the [SOFT] program?
z
This indicator display occurs while warm air is
blowing onto laundry during spin operations.
This is not a malfunction.
The remaining
time indicator is
longer than the set
spinning time.
z
In addition to the actual operation time, the
remaining time indicator also includes the
time used for the correction of uneven laundry
distribution, the acceleration of the drum, etc.
This is not a malfunction.
The remaining time
indicator displayed
immediately after
the operations
starts is longer
than the previous
time the operation
was used.
z
If the water pressure was low during the
previous operation (i.e., the water supply was
slow), the displayed time will be extended to
compensate for the longer water supply time.
This is not a malfunction.
z
Is the water supply inlet’s filter clogged?
Clean the water supply inlet.
(P. 77)
Troubleshooting
(continued)
Summary of Contents for BD-W3500
Page 198: ...198 ýĔüúęâ ...