English
11
3. Do not use an apparently damaged or deformed battery.
4. Do not use the battery in reverse polarity.
5. Do not connect directly to electrical outlets or car
cigarette lighter sockets.
6. Do not use the battery for a purpose other than those
speci
fi
ed.
7. If the battery charging fails to complete even when a
speci
fi
ed recharging time has elapsed, immediately stop
further recharging.
8. Do not put or subject the battery to high temperatures or
high pressure such as into a microwave oven, dryer, or
high pressure container.
9. Keep away from
fi
re immediately when leakage or foul
odor are detected.
10. Do not use in a location where strong static electricity
generates.
11. If there is battery leakage, foul odor, heat generated,
discolored or deformed, or in any way appears abnormal
during use, recharging or storage, immediately remove it
from the equipment or battery charger, and stop use.
CAUTION
1. If liquid leaking from the battery gets into your eyes, do not
rub your eyes and wash them well with fresh clean water
such as tap water and contact a doctor immediately.
If left untreated, the liquid may cause eye-problems.
2. If liquid leaks onto your skin or clothes, wash well with
clean water such as tap water immediately.
There is a possibility that this can cause skin irritation.
3. If you
fi
nd rust, foul odor, overheating, discolor,
deformation, and/or other irregularities when using the
battery for the
fi
rst time, do not use and return it to your
supplier or vendor.
WARNING
If a conductive foreign matter enters in the terminal of lithium
ion battery, the battery may be shorted, causing
fi
re. When
storing the lithium ion battery, obey surely the rules of
following contents.
○
Do not place conductive debris, nail and wires such
as iron wire and copper wire in the storage case.
○
To prevent shorting from occurring, load the battery
in the tool or insert securely the battery cover for
storing until the ventilator is not seen.
SPECIFICATIONS
POWER TOOL
Model
DS14DBEL
DS18DBEL
No-load speed (Low/High)
0 – 400 / 0 – 1500 min
-1
Capacity
Drilling
Wood
(Thickness 18 mm)
36 mm
38 mm
Metal
(Thickness 1.6 mm)
Steel: 13 mm
Aluminum: 13 mm
Driving
Machine screw
6 mm
Wood screw
6.8 mm (diameter) × 50 mm (length)
(Requires a pilot hole)
8 mm (diameter) × 75 mm (length)
(Requires a pilot hole)
Rechargeable battery
2LJRK
BSL1450: Li-ion 14.4 V (5.0 Ah 8 cells) BSL1850: Li-ion 18 V (5.0 Ah 10 cells)
2LFRK
BSL1425: Li-ion 14.4 V (2.5 Ah 4 cells) BSL1825: Li-ion 18 V (2.5 Ah 5 cells)
NN
―
―
Weight*
1.5 kg (With BSL1425 attached)
1.6 kg (With BSL1825 attached)
*Weight: According to EPTA-Procedure 01/2003
CHARGER
Model
UC18YFSL
UC18YML2
Charging voltage
14.4 V
―
18 V
Weight
0.5 kg
0.7 kg
STANDARD ACCESSORIES
DS14DBEL
(2LJRK)
DS18DBEL
(2LJRK)
1
Plus driver bit (No. 2) ........................ 1
2
Charger (UC18YFSL or UC18YML2) ..... 1
3
Battery (BSL1450 or BSL1850) ............ 2
4
Plastic case ...................................... 1
5
Battery cover .................................... 1
DS14DBEL
(2LFRK)
DS18DBEL
(2LFRK)
1
Plus driver bit (No. 2) ........................ 1
2
Charger (UC18YFSL or UC18YML2) ..... 1
3
Battery (BSL1425 or BSL1825) ............ 2
4
Plastic case ...................................... 1
5
Battery cover .................................... 1
DS14DBEL
(NN)
DS18DBEL
(NN)
1
Plus driver bit (No. 2) ........................ 1
Without charger, battery, plastic case and
battery cover.
Standard accessories are subject to change without notice.
000Book̲DS14DBEL̲C99209491̲305̲EE.indb 11
000Book̲DS14DBEL̲C99209491̲305̲EE.indb 11
2014/02/24 12:01:44
2014/02/24 12:01:44
