Hioki PQ3198, Instruction Manual

Page: 202 / 304

13.2 Input Specifications/Output Specifications/Measurement Specifications
196
Note 1: All CH4 displayed turn ON when CH4 is set to AC+DC.
Note 2: When CH4 is set to DC, the instrument does not display apparent power, reactive power, and power factor of CH4.
Note 3: When CH4 is turned OFF, all CH4 display values and waveforms are also turned OFF.
Note 4: Meaning of "*" in the "MAX/MIN/AVG" column
Indicates that maximum, minimum, and average values (all) can be displayed during the MAX/MIN/AVG TIME PLOT interval.
Note 5: Meaning of "**" in the "MAX/MIN/AVG" column
Indicates that maximum and minimum values (all) can be displayed, regardless of the MAX/MIN/AVG TIME PLOT interval.
*1: CH3 is calculated but not displayed. It can be output only as binary data.
*2: Select either.
Power factor/displace-
ment power factor
* 2
PF/DPF 1,4 1,2,4,sum
1,2,4,sum 1,2,3,4,
sum
1,2,3,4,
sum
1,2,3,4,
sum
*
Zero-phase voltage
unbalance factor
Voltage negative-
phase unbalance factor
Uunb0, Uunb - - sum sum sum sum *
Zero-phase current
unbalance factor
Current negative-phase
unbalance factor
Iunb0, Iunb - - sum sum sum sum *
High-order harmonic
voltage component
UharmH 1,4 1,2,4 1,2,4 1,2,3,4 1,2,3,4 1,2,3,4 *
High-order harmonic
current component
IharmH 1,4 1,2,4 1,2,4 1,2,3,4 1,2,3,4 1,2,3,4 *
Harmonic voltage
(orders 0 to 50th)
Uharm 1,4 1,2,4 1,2,4 1,2,3,4 1,2,3,4 1,2,3,4 *
Harmonic current
(orders 0 to 50th)
Iharm 1,4 1,2,4 1,2,4 1,2,3,4 1,2,3,4 1,2,3,4 *
Harmonic power
(orders 0 to 50th)
Pharm 1 1,2,sum sum sum 1,2,3,sum 1,2,3,sum *
Inter-harmonic voltage
(orders 0.5 to 49.5th)
Uiharm 1,4 1,2,4 1,2,4 1,2,3,4 1,2,3,4 1,2,3,4 *
Inter-harmonic current
(orders 0.5 to 49.5th)
Iiharm 1,4 1,2,4 1,2,4 1,2,3,4 1,2,3,4 1,2,3,4 *
Harmonic voltage
phase angle
(orders 1 to 50th)
Uphase 1,4 1,2,4 1,2,4 1,2,3,4 1,2,3,4 1,2,3,4
Harmonic current
phase angle
(orders 1 to 50th)
Iphase 1,4 1,2,4 1,2,4 1,2,3,4 1,2,3,4 1,2,3,4
Harmonic voltage-cur-
rent phase difference
(orders 1 to 50th)
Pphase 1 1,2,sum sum sum 1,2,3,sum 1,2,3,sum *
Total harmonic voltage
distortion factor
* 2
Uthd-F/Uthd-R 1,4 1,2,4 1,2,4 1,2,3,4 1,2,3,4 1,2,3,4 *
Total harmonic current
distortion factor
* 2
Ithd-F/Ithd-R 1,4 1,2,4 1,2,4 1,2,3,4 1,2,3,4 1,2,3,4 *
K factor KF 1,4 1,2,4 1,2,4 1,2,3,4 1,2,3,4 1,2,3,4 *
Voltage waveform
comparison
Wave 1 1,2 1,2 1,2,3 1,2,3 1,2,3
Mains signaling volt-
age Msv1, Msv%1,
Msv2, Msv%2
1 1,2 1,2 1,2,3 1,2,3 1,2,3 *
(5) Items measured without gaps and aggregated every approx. 200 ms
(about once every 10 cycles at 50 Hz, every 12 cycles at 60 Hz, or every 80 cycles at 400 Hz)
Measurement items Notation 1P2W 1P3W 3P3W2M 3P3W3M 3P4W 3P4W2.5E MAX/MIN
/AVG
HIOKI PQ3198A961-03