Hioki LR8432-20, Instruction Manual

Page: 181 / 238

Chapter 10 Specifications
173
3
10
C
h
a
p
ter
10
S
p
eci
ficat
io
ns
Calculation result
auto save After measurement, the final calculation value is automatically
saved to a CF card or USB flash drive in a text format.
Split calculation:
The calculation value at a certain time interval is saved in a text for-
mat in real time.
Waveform calculation
Calculation meth-
od Calculation (+, -,
×
,
÷
) between channels is performed and the cal-
culation data is displayed as data for the calculation channel (W1
to W10). (Enabled only during measurement)
Calculation is performed for the specified channel selected from
average, moving average, sum, and heat flow rate. The calculation
data is displayed as data for the calculation channel (W1 to W10).
(Enabled only during measurement)
• The number of points for the moving average can be set between
1 and 1000.
• For the average and sum, the calculation value can be reset at
the start trigger position and at a specified time interval after the
start trigger event.
Calculation result
auto save Calculation results are saved in real time as waveform data for any
channel.
Cursor measurement
functions
Time difference between A and B cursors, potential difference be-
tween A and B cursors, potential at each cursor, time at each cur-
sor
Scaling functions Available for each channel independently
Scaling can be set in ratio or with two points.
The conversion ratio can be automatically set based on the sensi-
tivity of the Heat Flow Sensor.
Gauge functions The gauges of two different channels can be displayed simulta-
neously.
Comment entry Provided
Event mark insertion Event markers can be inserted by pressing a screen button or in-
putting a signal to the trigger input terminal (exclusive function)
Screen image capture
function Provided (compressed bitmap format)
Retain start condition
function Provided
Automatic save func-
tion Waveform data (real-time), numerical calculation results (after
measurement)
Power to the instrument must not be interrupted while data is being
saved.
Miscellaneous