Hioki LR8432-20, Instruction Manual

Page: 63 / 238

3.3 Setting Configuration 1 – Recording Settings
55
3
3
C
h
apt
er 3
Set
ting
be
fo
re M
easurement
During real-time saving, removable storage can be replaced without interrupting mea-
surement. This procedure describes replacing a USB flash drive.
Replacing Removable Storage During Real-Time Saving
Move the cursor to [EJECT] .
Execute
Insert a formatted removable
storage.
Measurement data acquired while the de-
vice was removed is automatically written.
∗
Refer to “Formatting” (p. 113).
“Insertion” (p. 112).
Remove the USB flash drive
(p. 112).
Right bottom of the screen
Move the cursor to
[Unmount USB memory] .
Execute
Move the cursor to [Yes] .
Execute
Bottom of the screen
When both a CF card and USB flash drive are in-
stalled and either is removed, the save destina-
tion automatically switches to the remaining
media.
Execute
The media icon display will
change to the eject display.
• If a storage device is not replaced within two minutes after selecting
“Yes” in the “Do you want to remove the USB memory/CF card?” con-
firmation dialog, data may overflow internal memory and be lost.
• If a storage device is replaced during real-time saving, data is saved
to a new file.
• If measurement ends while the removable storage is ejected, even if a
removal storage is then inserted, the remaining data is lost. If this
occurs, the measurement data remaining on the instrument can be
retrieved with the manual save function.
Refer to
“6.3 Saving Data” (p. 114).