Hioki LR8432-20, Instruction Manual

Page: 69 / 238

3.4 Setting Configuration 2 – Input Channel Settings
61
3
3
C
h
apt
er 3
Set
ting
be
fo
re M
easurement
Configure these settings for each heat flow measurement channel when mea-
suring heat flow using heat flow sensors.
Heat Flow Measurement Settings
1
Select a channel ( CH 1 to CH 10 ) for the
[Channel] setting contents.
2
To enable measurement on the channel,
select On to display the check mark [ ] .
3
Select [Heat] for the [Input] (input type) set-
ting.
4
Select the appropriate measurement ampli-
tude range for the
[Range] setting.
Setting options:
10 mV*, 100 mV, 1 V, 10 V, 20 V, 100 V, 1-5 V
(* default setting)
5
Enter the sensitivity constant of the sen-
sor.
(When the sensitivity constant is set, the
scaling setting for the corresponding
channel is configured.)
* The test report that came with the Heat
Flow Sensor contains the sensor’s sensi-
tivity constant.
1 2
: ON
: OFF
3 4 5
Example
For a sensitivity constant of
0.02421 mV/W m
-2
, enter
the figures shown in the
above figure. Also enter a
unit prefix, if necessary.