Hioki LR8432-20, Instruction Manual

Page: 110 / 238

5.2 Selecting Display Options
102
There are two ways to display cursor values: displaying a list of values or dis-
playing the values of only two channels.
1
The A/B cursors and the values
are displayed.
To hide the display, press the
SCROLL/CURSOR key again.
2
Move the cursor.
The values on the waveform can
be checked.
Changing the cursor position
Select from the [Move] setting options.
(* default setting)
A Cur* B Cur AB Cur
Changing the cursor value type
Select from the [Type] setting options.
(* default setting)
Trace* Vert Horz
Cursor
Changing the display of cursor values
Select from the
[AB Crsr]
setting op-
tions.
•
All Ch
∗
Displays the list of cursor values.
Via a link to the channel selected in
the channel setting in this screen, the
list of cursor values is displayed as
below.
• When CH1 to CH10, P1 to P4, or
ALM is selected
The analog, pulse, or alarm channel
is displayed.
• When W1 to W10 is selected
The waveform calculation channel
is displayed.
The cursor value selected for [Move]
is displayed. Select [AB Cur] to dis-
play B-A values.
• Ch Set
Specify which channels (CH1 to CH10, P1 to
P4, or W1 to W10) to display with each A and
B cursor. The cursor values for the specified
channels are displayed.
(* default setting)
Cursor values in the list
Specified two cursor values
Moving the cursor while holding down the ESC key increases the travel distance.
Select the waveform screen.
Select [Wave+Crsr] .
Apply
Display [Wave+Crsr]
as follows.