Hioki LR8432-20, Instruction Manual

Page: 108 / 238

5.2 Selecting Display Options
100
A gauge corresponding to the measurement range of
each channel can be displayed at the left side of the
screen, for confirming measurement values. The color of
the gauge matches the waveform display color of its input
channel.
Press the
CH
or key to switch channels to be dis-
played on Gauge A from one to another. However, note
that when measurement data is displayed, only those
channels that are enabled (set to On
) for measurement
can be selected.
5.2 Selecting Display Options
Displaying Gauges
1
2
Select the Waveform
Screen.
Gauge A
Select [Gauge+Wave] .
Apply
Gauge B display and channel can be selected.
When [B] is enabled ( [ON] ), the display channel can be selected and
Gauge B is displayed on the left side of the screen.
Gauge B
Channel Markers
The channel of the channel marker wave-
form is displayed. The channel marker colors
are the same as the input waveform colors.
The channel markers are not displayed in the
[Wave]
,
[Value+Cmnt]
, or
[Value]
screen.