Hioki LR8432-20, Instruction Manual

Page: 34 / 238

1.5 Basic Operation
26
You can verify the input status and display range while making settings on the
Setting screen. This is not available while measuring.
Verifying the Input Level (Level Monitor)
Current Input
Signal Level
and Channel
Number
Level Monitor
Display Channel and Gauge
Shows the gauge for the current-
ly selected channel. The gauge
display is linked to the measure-
ment and display range settings.
Press the
CH

/

keys to dis-
play the gauge for another chan-
nel.
Changing the Monitor Display
Select whether to display all channels, or only selected channels.
[All Ch]/[SlctCh]/
[Value]
• [All Ch]
The channels displayed in the level monitor are those with a check mark ( ) dis-
played next to the channel number in the settings.
• [SlctCh] (Selected Channels)
The level monitor displays the channel selected on this screen.
• [Value]
The input values of all channels are displayed numerically.
Via a link to the channel selected on this screen, the input values are displayed in a
list as below.
• When CH1 to CH10, P1 to P4, or ALM is selected, the value of the analog, pulse,
or alarm channel is displayed.
• When W1 to W10 is selected, the value of the waveform calculation channel is dis-
played.
Displayable Waveform Range
This is determined by the waveform display range
setting.
Input Waveform Amplitude
Indicates real-time input ampli-
tude.
Using the Scaling function
(p. 69), measurement units
can be converted as desired
for display.