If you have any questions about configuring your Em50G or
downloading data from the METER server, please contact METER at
509-332-5600 or
.
]
METER Group, Inc. USA
2365 NE Hopkins Court
Pullman, Washington 99163
T: +1.509.332.5600
METER Group AG
Mettlacher Straße 8, 81379 München
T: +49 89 12 66 52 0
©2009−2018
13973-08 | 2.28.2019
Installing the software
Before taking the Em50G into the field, install ECH2O Utility on your
designated field computer.
1. Insert the installation USB into a computer or visit
to install ECH2O Utility on your computer.
2. Click “Run” to start the installer and follow the onscreen
instructions.
Test Buttons
The Em50G has a TEST button and two indicator LEDs above the
batteries for basic functionality testing.
• After the TEST button is pushed, both the ERROR
(red) and OK (green) lights will slowly blink on and off
indicating that the testing is in progress.
OK
ERROR
• When the Em50G is sending data to METER’s server,
the OK (green) light will blink rapidly.
• At the end of the testing, the OK (green) light will
remain lit for approximately 20 s if everything is
working properly.
• At the end of the testing, the ERROR (red) light
will remains lit, a communication error is occuring.
Perform a telemetry test to attempt to diagnose the
problem.
OK
ERROR
OK
ERROR
About the Em50G
Thank you for purchasing an Em50G data logger. The Em50G is a
data collection device collects and stores data from up to five METER
sensors. Collected data are sent to the METER Data Service using
cellular/mobile communication up to six times a day. You can access
your data from the METER Data Service at any time with DataTrac 3 or
by visiting
.
The Em50G is configured using ECH2O
®
Utility or ZENTRA Cloud.
ZENTRA Cloud is the preferred software package for the Em50G data
access and will be the primary reference throughout this quick start
guide.
Em50
®
G Data Logger
Quick Start Guide
