Hioki 2300 Smart Site Instruction Manual Download Page 73

Page: 73 / 366

4 2304-20 PULSE MODULE

4.2.1

Setting the Module ID

You can connect up to 63 measurement modules to one communi-
cations module.

Setting Procedure

Use the module ID setting dial to set the ID No. of the module to a
number from 01 and to 63. (You cannot set a number other than
the above.)

4.2 Settings

• Ensure that the set ID is not used for any other module con-

nected to the same communications module.

• The ID numbers of modules need not be consecutive.
• Setting the ID to 99, then turning on the power resets all inter-

nal settings to the defaults.

• The module ID and COM ID are not related and can be set

independently.

Summary of Contents for 2300 Smart Site















































































































































































































































































































































































Search results

Summary of Contents for 2300 Smart Site

Reviews:

Hioki 2300 Smart Site, Instruction Manual, Page: 73 / 366

Search results

Summary of Contents for 2300 Smart Site

Reviews: