Hioki 2300 Smart Site, Instruction Manual, Page: 328 / 366

19 2391-01, 2391-02, 2391-03 MODULE BASE
315
11
12
13
14
15
16
17
18
19
APPX
IDX
20
Example:
UL1007 AWG18/AWG16 (equivalent to 0.75 mm
2
/1.25 mm
2
) or
equivalent
300V vinyl-cabtire cable
VCTF 2-core, 1.0 mm
2
or more
The cable length shall not exceed 1 meter.
19.2.3 Connecting the CAN Cable
You can extend the internal bus by connecting a CAN cable to the CAN
terminal.
1.
Open the terminal cover.
2.
Use a plus screwdriver or similar tool to
loosen the terminal.
3.
Insert a lead into the terminal.
4.
Use a plus screwdriver or similar tool to
rishten the terminal, and fix a lead.
5.
Install the cover to the terminal.
6.
Turn OFF the termination switch of the
number corresponding to the CAN terminal
used to turn it off.
• Ensure length of all cables do not exceed 100 m.
• Connect terminal 1 to the module base near the communica-
tions module (upstream); connect terminal 2 to the module
base far from the communications module (downstream).