Hioki 2300 Smart Site, Instruction Manual, Page: 228 / 366

11 2341-20 INPUT MODULE
215
11
12
13
14
15
16
17
18
9
APPX
IDX
20
Setting the Module ID
You can connect up to 63 modules (measurement, input/output,
and link) to one communications module.
Setting Procedure
Use the module ID setting dial to set the ID No. of
the module to a number from 01 and to 63. (You can-
not set a number other than the above.)
11.2 Settings
• Ensure that the set ID is not used for any other module con-
nected to the same communications module.
• The ID numbers of modules need not be consecutive.
• Setting the ID to 99, then turning on the power resets all inter-
nal settings to the defaults.
• The module ID and COM ID are not related and can be set
independently.
• For COM ID, see the instruction manual for the communica-
tions module.