Hioki 2300 Smart Site, Instruction Manual, Page: 295 / 366

282
16 2354-20 MEMORY MODULE
(2) Inserting and removing the CF card
Procedures
1.
Open the cover
Open the cover as shown in the dia-
gram if it is closed. CF CARD LED
will start to flash in green.
2.
Take out the CF Card
Follow the diagram and carry out the
following steps when the CF CARD
LED is unlit.
When the eject button is pressed
once, the card will be released. Press
it back all the way one more time.
When the card is not fully inserted, it
will come undone again. Press the
eject button firmly all the way to the
end. Pick the CF card when it is
released to remove it.
3.
Inserting the CF card
Align the

mark on the CF card with
the

mark on the case and insert the
card all the way in, as shown in the
diagram. Do not mistake the front
and back or direction of insertion and
force the card into the case. This will
damage the card or the instrument.
4.
Close the cover
Close the cover until you can hear a
click sound.
Once the cover is closed, a green
light will flash (mounting) and turn
green after a while. Do not force
close the cover when the CF card or
eject button is protruding from the
instrument. Follow step 2 again.
Press
If the CF CARD LED does not flash green even after the
cover is closed, confirm that the card is inserted properly
and the cover is fully closed. In addition, if the green flash-
ing light turns orange or red, this means the capacity in the
CF card is not enough or that the card is spoilt. We recom-
mend changing the card.