Hioki 2300 Smart Site, Instruction Manual, Page: 308 / 366

17 2361-20 AC POWER MODULE
295
11
12
13
14
15
16
17
18
19
APPX
IDX
20
17.3.1 Basic Specifications
17.3.2 Function Specifications
17.3.3 General Specifications
17.3 Specifications
Operation Supplies power to measurement/communications modules.
Rated output voltage 5.0 VDC
Maximum
output current 2.4 A
Maximum output
power 12.0 VA
Output voltage
accuracy ±5.0% (Within operating temperature and humidity ranges)
Overcurrent
protection Min. 105%
(Output current limiting and automatic reset)
Overvoltage
protection Min. 110% (Zener diode clamp)
Input surge current Up to 20 A at 100 VAC or 40 A at 200 VAC
Parallel operation Not available
Communication inter-
face Not available
Input terminal Terminal block (Front panel)
Output terminal Internal bus connector
Power switch ON/OFF of output voltage
Rated supply voltage 100 to 240 VAC (50/60 Hz)
(Voltage fluctuations of ±10% from the rated supply voltage are taken into account.)
Maximum rated
power 20 W
Dielectric strength 3.0 kVAC (Between Input L, N and output)
Response current 20 mA
2.0 kVAC (Between Input L, N and FG)
Response current 20 mA
Fuse 2.5 A Built-in time-lag fuse (on the live side)
Dimensions Approx. 45.5W × 96H × 94.5D mm
(1.79"W × 3.78"H × 3.72"D)
(Including cover, excluding projections)
Mass Approx. 275 g (9.7 oz.) (Including cover)
Accessories Ferrite clamp............................................................................................................... 1
Options 9239-20 POWER CORD
(for USA, with round crimp connector)
9239-21 POWER CORD
(for CE, with round crimp connector)
Operating
temperature and
humidity 0 to 50°C (32 to 122°F), 80%RH or less
(non-condensating)