manualshive.com logo in svg

Hioki 2300 Smart Site, Instruction Manual, Page: 333 / 366

Share
Download
Hioki 2300 Smart Site Instruction Manual Download Page 333

320

20  2392-01/02 MODULE BASE

20.1.3 Name and Function of the Parts

2392-01

The 2392-02 is a base for communications, measure-
ment, and input/output modules. Power is supplied
from the 2392-01.

The internal buses can be connected using CAN ter-
minals. Up to 63 measurement modules can be con-
nected to a single communications module.

CAN cables should not be extended beyond 100 m (328 feet).
Due to the capacity of the power supply module, the number of
the 2392-02 MODULE BASEs connected to the 2392-01 is lim-
ited to five.

Front

\Back

Power supply

SHIELD terminal 

DIN connector

DIN rail mount connector

for module

(connector for 

internal bus

Connector for 

module base

CAN terminal

(M4.0)

DIN rail removal lever

CAN termination

Mounting hole

Mounting hole

Mounting hole

connection 

connection

switch

connection, M4.0)

terminals (M4.0)

Summary of Contents for 2300 Smart Site















































































































































































































































































































































































Reviews:

No comments