manualshive.com logo in svg

Hioki 2300 Smart Site, Instruction Manual, Page: 301 / 366

Share
Download
Hioki 2300 Smart Site Instruction Manual Download Page 301

288

16  2354-20 MEMORY MODULE

Before Disposing of the Instrument

The instrument contains a lithium battery for memory backup.

Required tools:

• One Phillips screwdriver
• One pair of wirecutters

1.

Remove the 4 screws securing the lower case. 

2.

Use wire cutters to clip both leads of the button style lithium
battery. 

16.6 Disposing of the Instrument

• To avoid electric shock, turn off the power switch and dis-

connect the power cord and cables before removing the
lithium battery

• Battery may explode if mistreated. Do not short-circuit,

recharge, disassemble or dispose of in fire.

When disposing of this instrument, remove the lithium battery and dis-
pose of battery and instrument in accordance with local regulations.

lead

board

CALIFORNIA, USA ONLY
This product contains a CR Coin Lithium Battery which 
contains Perchlorate Material - special handling may apply. 
See www.dtsc.ca.gov/hazardouswaste/perchlorate

Summary of Contents for 2300 Smart Site















































































































































































































































































































































































Reviews:

No comments