Hioki 2300 Smart Site, Instruction Manual, Page: 260 / 366

13 2343-20 RS LINK MODULE
247
11
12
13
14
15
16
17
18
19
APPX
IDX
20
13.4.1 Basic Specifications
13.4.2 Function Specifications
Execute the functions from the PC application via communications.
Monitoring function
Measured value recording function
13.4 Specifications
Operations Communicates with an external RS-232C device and obtains the status of or controls
the device.
External
communications
interface RS-232C
Connector
: D-SUB 9-pin
Transmission rate : 2400/4800/9600/19200/38400/57600 bps
Parity
: None/Odd/Even
Bit length : 7 bits/ 8 bits
Stop bit : 1 bit/ 2 bits
Handshake : None
Internal
communications
interface CAN (for communications with the communications module at a rate of 500 kbps)
Standard
connectable device 3331, 3332, 3193 (On special order), MELSEC
This function outputs the current status of the output terminal (hereinafter called "measured value").
This function sends commands to external RS devices at every preset recording interval, and records the
values returned (measured values).
Command value for-
mat ASCII/Binary format, selectable

When setting an arbitrary device
Return value format ASCII/(Comma/character-delimited)/Binary (Fixed length), selectable

When setting an arbitrary device
Real-time manage-
ment This is automatically set from the PC application at the start of recording.
Recording start Immediate start/Reserved-time start
Recording end Manual end/Reserved-time end
Operation when
memory is full Memory full stop /Endless

Set the condition before the start of recording.
Recording interval 1/2/5/10/15/20/30 sec., 1/2/5/10/15/20/30/60 min.
Recording mode • Instantaneous value
• MAX/MIN/AVE
• Instantaneous value + MAX/MIN/AVE
Total 3 modes

Set the mode before the start of recording.
Recorded data One data set: Time + value returned from an external device.
Quantity of recorded
data It depends ondconnectable device.
Recording capacity 512 k bytes Flash memory
Power outage
protection After recovering from a power outage, the instrument automatically returns to the state
held before the outage.