Hioki 2300 Smart Site, Instruction Manual, Page: 307 / 366

294
17 2361-20 AC POWER MODULE
.
3.
Connect the cable leads as shown below (at tightening torque of
0.8 N•m).
We recommend that you use M4 round crimp connectors.
Example: RAV 1.25 - 4
When using the optional 9239-20 POWER CORD, connect leads E,
N, and L in this order from the left, while referring to the marker tubes.
4.
Connect the power cable to the power source (AC outlet or panel-
board).
In case of external noise,
mount the ferrite core supplied as an accessory as shown below.
5.
Turn on the POWER switch (push it to the "I" side).
6.
Secure the cover back in place.
4
2 to 3
5
1
6
When the power cord is plugged into the power source (power outlet,
distribution board, etc.), the terminal block of the instrument bears live
power. Take care not to touch it when attaching/removing the cover, or
on other occasions, as electric shock or short-circuit may result.