Hill-Rom CareAssist P1170, Service Manual

Page: 62 / 197

2.8 Trendelenburg/Reverse Trendelenburg Malfunction
Chapter 2: Troubleshooting Procedures
Page 2 - 20 CareAssist™ Bed Service Manual (man330)
2.8 Trendelenburg/Reverse Trendelenburg Malfunction
Initial conditions: the hilow function works (see “Function Checks” on page
2-4).
1. At least one of the other functions is working.
Yes No
↓ →
Go to RAP 2.1.
2. Do the following to make sure the caregiver controls operate correctly.
a. Disconnect the control unit.
b. Connect a known good control unit.
The trendelenburg/reverse trendelenburg function works.
Yes No
↓ →
Replace the power supply (refer to procedure 4.3 on page 4-9).
If this solves the problem perform the “Final Actions” on page
2-9, otherwise contact Hill-Rom Technical Support.
3. Replace the affected control unit.
This solves the problem.
Yes No
↓ →
Contact Hill-Rom Technical Support.
4. Go to “Final Actions” on page 2-9.