Hill-Rom CareAssist P1170, Service Manual

Page: 46 / 197

Function Checks
Chapter 2: Troubleshooting Procedures
Page 2 - 4 CareAssist™ Bed Service Manual (man330)
Function Checks
1. The "Initial Actions" have been performed.
Yes No
↓ →
Go to “Initial Actions” on page 2-2.
2. Set the brakes, raise and lock the siderails in the high position. Plug in the
power cord into an appropriate power source.
3. Operate the trendelenburg function.
This function works.
Yes No
↓ →
Go to RAP 2.1.
4. Lock at least one bed function (such as the head section).
The corresponding indicator is illuminated.
Yes No
↓ →
Go to RAP 2.2.
5. Lock out all bed functions.
All of the lock out indicators illuminate (except the Bed Not Down
Indicator).
Yes No
↓ →
Go to RAP 2.2.
6. Unlock all of the functions.
All of the lock out indicators go off (except the Bed Not Down Indicator).
Yes No
↓ →
Go to RAP 2.2.
7. Press the Bed Up control.
The bed rises to the high position without stopping or an audible alarm
sounding.
Yes No
↓ →
Go to RAP 2.3.
8. Press the Bed Down control.
The bed goes down to the low position without stopping or the audible
alarm sounding. In addition, the "Bed Not Down" indicator goes off when
the bed reaches the lowest position.