Hill-Rom CareAssist P1170, Service Manual

Page: 106 / 197

4.8 Foot Section Motor
Chapter 4: Removal, Replacement, and Adjustment Procedures
Page 4 - 26 CareAssist™ Bed Service Manual (man330)
14. Remove the foot motor (J) from the bed.
Replacement
1. Perform the removal procedure in the reverse order.
CAUTION:
Ensure that the elastic found on the new motors is not wound around
the motor body before removing it (cut). If necessary, turn the motor
end rod in the appropriate direction to unwind this elastic. Indeed, it is
used to indicate the correct position of the switches and internal end of
travels of the motor. The incorrect position of these elements may
damage the motor or the structure of the bed.
2. Remove the elastic from the motor.
3. To make sure the CareAssist™ Bed operates correctly, do the “Function
Checks” on page 2-6.