Hill-Rom CareAssist P1170, Service Manual

Page: 178 / 197

Preventive Maintenance
Chapter 6: General Procedures
Page 6 - 8 CareAssist™ Bed Service Manual (man330)
Foot section motor Raise the knee section to the mid-height position.
Inspect the foot actuator. Make sure the pins and retaining rings are
present.
Fully raise and the foot section.
Make sure there is no friction or abnormal noises and that no audible
overload indication can be heard during the movement.
Replace as necessary.
Dining Chair™
Position Make sure the Chair, head section, thigh section and foot section
functions are not locked out.
Activate the chair function and make sure the three sections to the
required position.
Return the sleep deck to the flat position.
Troubleshoot as required.
Trendelenburg/
Reverse
Trendelenburg Activate the Trendelenburg function.
Make sure there is no friction or abnormal noises and that no audible
overload indication can be heard during the movement.
Activate the Reverse Trendelenburg function.
Make sure there is no friction or abnormal noises and that no audible
overload indication can be heard during the movement.
Replace as necessary.
Battery Make sure that the bed is unplugged from its power source.
Operate all the functions using the caregiver controls.
Charge the batteries or replace them if necessary.
Check the date indicated on the batteries, replace the battery if the
date is over three years.
Function Procedure