DS-6700HFHI/V Series Network HD Encoder User Manual
8
Connectable with network HDD in NAS, IP SAN mode.
Send email by SMTP protocol, and support attachment of captured JPEG image and SSL encryption.
PTZ Control
Support Multiple PTZ Protocols
Different channels can be configured with protocol type, RS-485 address, baud rate, data bit, stop bit, even &
odd parity, stream control method, etc.; and remote configuration of presets, patrols and patterns.
Digital Zooming (with Speed Dome)
When connected with Hikvision speed dome, digital zooming can be realized by clicking on the image
through client software.
PTZ linkage
Relay input alarm can be responded with PTZ linkage actions, e.g., callup of predefined presets or patrols.
Alarm
Relay Alarm Input
Either NO mode or NC mode can be set.
Four different alarm arming periods are configurable.
Capabilities of triggering corresponding alarm handling methods, relay alarm output, buzzer alarm, upload
to control center, PTZ linkage, presets/patrols/patterns callup, etc.
Relay Alarm Output
Relay alarm output can be connected with alarm devices for alarm handling within arming period.
Exceptions
Exception Alarm Handling
Exception alarms include network disconnect alarm, IP address conflict alarm, illegal access alarm, etc.;
multiple alarm handling methods are supported, relay alarm output, buzzer alarm, upload to center, etc.
Exception Reboot
Software watchdog capability: for inspecting important threads and system resources of device; in case of
exceptions detected, the device will be automatically rebooted.
Firmware watchdog: for inspecting the firmware of device; in case of exceptions in system task scheduling,
the device will be automatically rebooted.
Logs
The system logs can be classified into the operation logs, alarm logs, exception logs and information logs.
User may search and view all recorded system logs by date or type, as well as export the logs to the text
format over network.
Network disk/microSD card must be connected before log operation.