HIKVISION DS-6700HFHI/V Series, User Manual, Page: 52 / 76

DS-6700HFHI/V Series Network HD Encoder User Manual
51
Figure 7. 12 Alarm Input Settings-Arming Time
3. Check the checkbox of Enable to enable the alarm input.
4. Set the arming schedule for the alarm input. Refer to Step 2 Set the Arming Schedule for Motion Detection
in Section Configuring Motion Detection.
5. Click the Linkage Metho d tab to set the actions taken for the alarm input. Refer to Step 3 Set the Alarm
Actions Taken for Motion Detection in Section Configuring Motion Detection .
Figure 7. 13 Alarm Input Settings-Linking Method
6. You can also choose the PTZ linking for the alarm input if your camera is installed with a pan/tilt unit.
(1) Choose the PTZ Linking channel.