DS-6700HFHI/V Series Network HD Encoder User Manual
28
6.3
Network Settings
6.3.1
Configuring TCP/IP Settings
Network settings must be properly configured before you operate device over network.
Steps:
1.
Click
Configuration >
Network > Basic Settings > TCP/IP
to enter the TCP/IP Settings interface:
Figure 6. 7
TCP/IP Settings
2.
Configure the NIC settings, including the NIC Type, IPv4 Address, IPv4 Subnet Mask, IPv4 Default
Gateway, and MTU setti
ngs
.
The valid value range of MTU is 500 ~ 1500.
3.
If the DHCP server is available, you can click the checkbox of DHCP to automatically obtain an IP address
and other network settings from that server.
4.
If the DNS server settings are required for some applications (e.g., sending email), you should properly
configure the Preferred DNS Server and Alternate DNS Sever here.
5.
Click the
Save
button to save the above settings.
6.3.2
Configuring DDNS Settings
If your device is set to use PPPoE as its default network connection, you may set Dynamic DNS (DDNS) to be