DS-6700HFHI/V Series Network HD Encoder User Manual
57
Chapter 8
Storage Configuration
8.1
Adding Network Disk
You must configure the network disk before operating the recording, playback or log searching.
Before you start:
1.
The network storage device is available within the network and is properly connected.
2.
The network storage device is configured with NAS or IP SAN mode (please refer to the User Manual of IP
SAN/NAS).
Steps:
1.
Click
Configuration >
Storage > Storage Management > Net HDD
to enter the network disk settings
interface.
Figure 8. 1
Net HDD Settings Interface
2.
You can search the available NAS/IP SAN disks in the designated storage sever by entering its IP address.
1)
Select the type to NAS or IP SAN, as shown in Figure 7.19.
2)
Enter the IP address of the designated storage server.
3)
Click
Search
and the available NAS or IP SAN disks in this storage server will be listed below.