DS-6700HFHI/V Series Network HD Encoder User Manual
71
11.2
Viewing Device Information
Click
Configuration >
System >
System Settings > Basic Information
to enter the Device Information interface
of the encoder:
You can edit the Device Name and Device No., and view the device information, including Model, Serial No.,
Firmware/Encode Version, Number of Channels, Number of HDDs, and Number of Alarm Input / Output.
11.3
Upgrade & Maintenance
Click
Configuration > System > Maintenance > Upgrade & Maintenance
to enter the Maintenance interface of
the encoder:
Figure 11. 2
Maintenance Page
11.3.1
Rebooting the Device
On the
Upgrade & Maintenance
interface, click
Reboot
to enter the following message box:
Figure 11. 3
Reboot the Device
Click
OK
to reboot the device or
Cancel
to cancel the operation.
11.3.2
Restoring Default Settings
On the
Upgrade & Maintenance
interface, click
Restore
or
Default
to restore device parameters to the factory
settings.