HIKVISION DS-6700HFHI/V Series, User Manual, Page: 53 / 76

DS-6700HFHI/V Series Network HD Encoder User Manual
52
(2) Check the relative checkbox to enable Preset Calling, Patrol Calling or Pattern Calling.
7. You can copy your settings to other alarm inputs.
8. Click Save to save the settings.
7.7.3 Configuring Video Loss Alarm
Steps:
1. Click Configuration> Event > Basic Event > Video Loss to enter the video loss alarm setting interface.
Figure 7. 14 Video Loss Alarm Settings
2. Select the camera to configure the video loss alarm.
3. Check the checkbox of Enable Video Loss .
4. Configure the arming schedule for video loss detection. The arming schedule configuration is the same as
the Setting of the Arming Schedule for Motion Detection. Please refer to Step 2 Set the Arming Schedule
for Motion Detection in Section Configuring Motion Detection.
5. Click the Linkage Method tab to set the actions taken for the video loss alarm. Please refer to Step 3 Set the
Alarm Actions Taken for Motion Detection in Section Configuring Motion Detection .
7.7.4 Configuring Video Tampering Alarm
Purpose:
If you enable this function, an alarm will be triggered when the image of camera is tampered with.
Steps:
1. Click Configuration> Event > Basic Event > Tamper-proof to enter the Video Tampering Settings
interface.
2. Select the camera to configure the video tampering detection alarm.