DS-6700HFHI/V Series Network HD Encoder User Manual
34
The Ports indicate the port No. for mapping in the router.
5.
Click
Save
to save the settings.
After port mapping is successful, you can view the status of the port mapping on the Port Status area.
6.3.6
Configuring SNMP Settings
Simple Network Management Protocol (SNMP) is an Internet-standard protocol for managing devices on IP
networks
.
You can use SNMP to get camera status, parameters and alarm related information.
Before you start:
Before setting the SNMP, please download the SNMP software and manage to receive the device information via
SNMP port. By setting the Trap Address, the device can send the alarm event and exception messages to the
surveillance center.
The SNMP version you select should be the same as that of the SNMP software.
Steps:
1.
Click
Configuration >
Network > Advanced Settings >SNMP
to enter the SNMP settings interface.
2.
Check the checkbox to enable SNMP v2c, and configure the read SNMP community (default: public), write
SNMP community (default: private), tap address (default: empty) and trap port (default: 162).
Figure 6. 17
SNMP Settings (1)
3.
Set the SNMP port (default: 161).
4.
Click
Save
to save the above settings.
6.3.7
Configuring Email Settings
Purpose:
The device can be configured to send an Email notification to all designated receivers if an alarm event is detected,
e.g., motion detection event, video loss, tamper-proof, etc.
Before you start
1.
Before configuring the Email settings, the device must be connected to a local area network (LAN) that
maintains an SMTP mail server. The network must also be connected to either an intranet or the Internet