HIKVISION DS-6700HFHI/V Series, User Manual, Page: 51 / 76

DS-6700HFHI/V Series Network HD Encoder User Manual
50
Figure 7. 11 Motion Detection-Alarm Output Settings
2) Select one alarm output channel in the Alarm Output drop-down list.
3) The D elay time can be set to 5sec , 10sec , 30sec , 1min , 2min , 5min, 10min or Manual . The
Delay refers to the time duration that the alarm output remains in effect after alarm occurs.
If you choose Manual , you need to manually disable the alarm output.
4) Click on the time bar and drag the mouse to select the time period. The time schedule
configuration is the same as the Setting of the Arming Schedule for Motion Detection. Refer to Step 2
Set the Arming Schedule for Motion Detection in Section Configuring Motion Detection.
5) Return to the Alarm Output Settings interface and click Save to save the settings.
(4) Click Save to save the settings of linking method motion detection.
7.7.2 Configuring External Alarm Input
Steps:
1. Click Configuration> Event > Basic Event > Alarm Input to enter the Alarm Settings interface.
2. Choose the alarm input number and the Alarm Type. The alarm type can be NO (Normally Open) and NC
(Normally Closed).