DS-6700HFHI/V Series Network HD Encoder User Manual
22
Figure 5. 6
Set a Preset
3.
Use the PTZ control buttons to move the lens in the desired position. You can use any of the following
commands:
• Pan the camera to the right or left.
• Tilt the camera up or down.
• Zoom in or out.
• Refocus the lens.
4.
Click the
icon to finish the setting of current preset.
Up to 256 presets are configurable depending on the PTZ protocol applied.
Calling a Preset:
This feature enables the camera to point to a specified preset scene when an event takes place.
For the pre-defined preset, you can call it at any time to the desired preset scene.
In live view mode, select a predefined preset from the list and click the
icon to call a preset.
Figure 5. 7
Call a Preset
Linking to Alarm:
The preset can also be used to link to the alarm input when there is alarm event occurring.