DS-6700HFHI/V Series Network HD Encoder User Manual
37
Figure 6. 20
Installed Certificate
3.
When you have successfully created and installed the certificate, check the checkbox of
Enable
to enable
the HTTPS function.
4.
Click the
Save
button to save the settings.
After the HTTPS feature is enabled, the system will use the HTTPS
login mode by default when you input the IP
address (e.g.,
https://192.0.0.64). You can also input http://IP address/index.asp (e.g.,
if you want to use HTTP mode to log into the device.
6.3.9
Configuring Active Multicast
Purpose:
The active multicast address can be configured to realize live view for more than the maximum number of
cameras through network, and after successful configuration, the device can actively send the stream to the
multicast address.
A multicast address spans the Class-D IP range of 224.0.0.0 to 239.255.255.255. It is recommended to use the IP
address ranging from 239.252.0.0 to 239.255.255.255.
Steps:
1.
Click
Configuration >
Network > Advanced Settings >Active Multicast
to enter the active multicast
address settings interface.
Figure 6. 21
Multicast Address Setting
2.
Select the camera to configure the multicast.
3.
Check the checkbox of
Enable
to enable the feature.
4.
Select the stream type to Main Stream or Sub Stream which is sent to the multicast address for live view.